Can you connect PEX to copper with SharkBite?

Can you connect PEX to copper with SharkBite?

SharkBite brass push-to-connect fittings are compatible with PEX, Copper, CPVC, PE-RT and HDPE pipe. SharkBite fittings come with a PEX stiffener pre-loaded into the fitting for PEX, PE-RT and HDPE.

Can you connect PEX to copper without soldering?


If you don't want to bother with soldering, opt for a SharkBite fitting. ... Just as the PEX pipe is pushed into the PEX end of the fitting, the copper pipe is pushed into the other end. That's it! Thanks to the push-fit mechanism of the fitting, you've made a watertight connection.
Feb 27, 2018

Can you connect copper pipe to PEX?

PEX works well with existing copper plumbing. There is no concern that any of the materials used in either type of pipe will negatively react to the other type of pipe, making them very compatible. The two types of pipe easily connect together using several different types of connectors, such as: Solder-on.Nov 15, 2020

Are SharkBite PEX fittings reliable?

Fact: Contractors who use SharkBite find it to be a dependable and safe solution in concealed spaces, including behind the wall and underground. For example, Clint McCannon, owner of Cannon Plumbing, used SharkBite PEX and EvoPEX to repipe an entire home, with no concern about failed fittings or leaks.Apr 2, 2019

image-Can you connect PEX to copper with SharkBite?
image-Can you connect PEX to copper with SharkBite?

Do shark bites leak?

SharkBite fittings are designed to create a leak-proof seal. When a SharkBite fitting does leak, the first thing you'll want to do is see if the pipe is connected to the fitting correctly. By disconnecting and reconnecting the pipe, you may fix the problem.Feb 9, 2019


Do you need to clean copper pipe for SharkBite?

Outer edge of the copper pipe must be reamed clean – we advise to ream/deburr the inside also to reduce turbulence. When pipe is not reamed or reamed improperly, abrasive edges may cut the O-ring which seals off the water. ... When pipe is not fully inserted, it will leave room for leakage.


Can you use SharkBite on soft copper?

Can SharkBite fittings be used with soft copper or rolled copper? No. SharkBite fittings can only be used with hard drawn copper types K, L, and M.


What is the best way to connect PEX tubing?

The most common connection method used in PEX installation is the “Crimp” method. This process involves sliding a ribbed fitting into the PEX tube and crimping a seal ring around the connection point. These rings are typically made of copper, but may be found in plastic as well as brass.


Why do plumbers hate Sharkbites?

Jamming them in too quickly could cause damage to the O-ring resulting in a leaky pipe. ☆ If your pipes are PEX, then you'll have to use a special insert. This insert keeps the pipe from becoming collapsed. The good news is that if you're using SharkBite, the insert is already built into the fittings itself.Sep 22, 2021


Are shark bites as good as solder?

So far they seem to be just as reliable, although given that they've only been on the market for a few years they don't have the same history as soldered connections. Here in the UK almost all new-build houses use push-fit connectors for concealed work as it's much quicker and easier.


Is SharkBite and PEX the same thing?

Push-fit or stab-in plumbing fittings are a popular type of PEX and copper fitting; SharkBite is a popular brand name of push-fit fittings. With a bit of effort, the pipe pushes into the fitting and is held in place by tiny teeth. Push-fit fittings are the only connector that work either with copper pipe or PEX pipe.Jun 8, 2021


Can you use SharkBite on PEX type A?

Method 2: SharkBite Fitting

SharkBite does make a coupling that connects PEX-A to PEX-B. However, we don't recommend using them.
Apr 5, 2021


Why is Pex better than copper?

  • However, the reason PEX is better than copper is that it is inexpensive , requires less labor, needs fewer connections and fittings, and does not heat up like copper. Overall, PEX is the best because it's affordable, durable , and is fast installation .


Is PEX plastic tubing better than copper?

  • PEX doesn't degrade like copper, higher PSI rating freezing pipes will still burst, but PEX will be able to handle more freezing water than copper. PEX Tubing is much more resistant to freeze-breakage than copper or rigid plastic pipe. PEX Tubing is cheaper because it takes much less labor to install.


Are PEX pipes better than copper pipes?

  • According to Nick Simon, owner of Nick's Residential Service Plumbing in Streamwood, Illinois, PEX and other plastic piping are superior to copper . "It [plastic piping] is less expensive and works great," he says. Ward agrees that PEX is the ideal piping system. He says PEX delivers cleaner water than copper pipes because it doesn't carry any traces of metal.

Share this Post: