Blog

Does the Shur-line edger work?

Who makes Shur-line?

Shur-Line, which makes painting products including brushes and rollers, has 200 employees in St. Francis. Its parent company, Newell Rubbermaid, sold Shur-Line and other product lines to Nova Capital, which will operate the five brands under the Piedmont Hardware Brands name.Sep 23, 2013

Are paint pads any good for cutting in?

βœ”οΈ 𝗑𝗒 π—¦π—£π—œπ—Ÿπ—Ÿπ—¦, 𝗑𝗒 π—¦π— π—¨π——π—šπ—˜π—¦, 𝗑𝗒 𝗗π—₯π—œπ—£π—¦ - Cutting in is much easier with a pad because of the consistency of paint on the pad. It's not as fast as a roller for huge areas but you'll save time in the clean up, and you'll get an outstanding finish from pads over both rollers and brushes.

What is a Shur-line?

Shur-Line Paint Pad & Trim Tool

This handy painter is 6 inches and can be used with all sorts of paints and stains. ... Its edges will take care of painting your corners and smoothing your edges.

Does the Accubrush really work?

We found that the Accubrush works β€œbest” under ideal conditions. What are ideal conditions? Surfaces that are perfectly smooth, low textured, with no imperfections. For uneven surfaces, like many ceilings and walls, the Accubrush doesn't paint in the promised straight, even line.Aug 3, 2018

Related

Where is Shur line made?

Product Description. This item is Shur-Line Paint Pad And Handle 9 " . Used for Painting Supplies Brushes & Rollers. This product is Manufactured in China.

Related

What is paint pad?

A paint pad is the ideal tool for painting ceilings, trim, and tight areas. Unlike a brush, this tool isn't made from bristles. Instead, it's a flat, handheld device with a refillable pad often made from polyester, fleece, or foam.Aug 26, 2015

Related

Are paint edgers any good?

The Emery Edger Paint Brush Edging tool is the perfect paint edger for quick projects. First, it's designed to easily snap onto a standard 3-inch paintbrush. This design also permits quick cleanup and is remarkably effective at achieving clean edges around trim, baseboards, and other tricky paint jobs.

Related

Do paint pads work for cutting in?

βœ”οΈ 𝗑𝗒 π—¦π—£π—œπ—Ÿπ—Ÿπ—¦, 𝗑𝗒 π—¦π— π—¨π——π—šπ—˜π—¦, 𝗑𝗒 𝗗π—₯π—œπ—£π—¦ - Cutting in is much easier with a pad because of the consistency of paint on the pad. It's not as fast as a roller for huge areas but you'll save time in the clean up, and you'll get an outstanding finish from pads over both rollers and brushes.

Related

Why does my paint roller slide instead of roll?

You'll know immediately when you've overloaded the roller. It will drip en route to the wall and have a tendency to slide and smear instead of roll across the surface. ... On walls, that means the first stroke should be up. If you roll down on the first stroke, the paint may puddle under the roller and run down the wall.

Related

What is a Shur line paint Edger?What is a Shur line paint Edger?

The Shur Line Paint Edger is a pad-style paint edger with plastic wheels designed to reduce friction as the paint edger runs along the wall surfaces. Low in price, the Shur Line is the ubiquitous paint edger found at practically all hardware and even department stores.

Related

Which is better roller or paint pad?

Paint pads give good coverage and a smooth, even finish. They are much cleaner to use than rollers, as there is no spray. They do need reloading more often than rollers, but they still do the job quickly. Because of the smooth finish they give, paint pads are particularly good for ceilings.

Related

Is it better to paint walls with brush or roller?

Brushes are ideal for small areas, or areas where more precision painting is needed. Brushes are ideal for trim, corners, and edges. A roller is designed to cover a large area, and hold a lot of paint to cover more area at once. Paint rollers are perfect for walls, ceilings, and any large size surface.Dec 29, 2016

Related

Is it better to spray or brush trim?

In the reality of an existing home, spraying your trim will cause you a ton of extra work while delivering results that while better than brushing, are not significant enough to justify the extra work for 95% of the people out there, the possibility of overspray getting on areas you don't want it or the extra smell ...Aug 16, 2021

Related

Should you paint molding or walls first?

Paint the Trim First, Then the Ceilings and Walls

That's because it's easier (and faster) to tape off the trim than to tape off the walls. And you certainly don't want to tape them both off!
Nov 15, 2019

Related

Is the Shur line pro paint Edger a good product?

  • Shur-line Pro Paint Edger Product Review Damn, this new redesign with the notched edges is going to be a problem for the way I use the pads. You can apply the material quickly and strike it off at the end to remove any visible application lines or streaks – all of which leaves a very even and smooth finish.

Related

What's the difference between Shur pro and PRO premium?

  • The differences are that the Pro Premium has a quick pad release button on the handle for true one finger removal. The rubber edged handle will rotate a full 180 degrees for better ergonomics. But, who knows, I haven’t tried the Pro Premium, so I can’t say for sure if I’d like it better.

Related

How do you replace the pad on a Shur Edger?

  • Removing the pad is a little easier with the release tabs on either side. (Versus sliding the pad off the bottom of the edger.) To replace the pad, simply snap it back in place and you are ready to roll.

Related

Is the Shur line pro paint Edger a good product?Is the Shur line pro paint Edger a good product?

Shur-line Pro Paint Edger Product Review Damn, this new redesign with the notched edges is going to be a problem for the way I use the pads. You can apply the material quickly and strike it off at the end to remove any visible application lines or streaks – all of which leaves a very even and smooth finish.

Related

When did Shur line start making painting tools?When did Shur line start making painting tools?

Since the inception of our first edger in the 1950s, Shur-Line has been the leader in designing convenience tools that make painting projects easier, faster and even fun. We offer a full product line of brushes, roller covers, mini rollers, paint trays, poles, frames, surface prep, edging and convenience tools.

Related

What's the difference between Shur pro and PRO premium?What's the difference between Shur pro and PRO premium?

The differences are that the Pro Premium has a quick pad release button on the handle for true one finger removal. The rubber edged handle will rotate a full 180 degrees for better ergonomics. But, who knows, I haven’t tried the Pro Premium, so I can’t say for sure if I’d like it better.

Related

When was the first Shur blade Edger made?When was the first Shur blade Edger made?

Since the inception of our first blade edger in the 1950s, Shur-Line has been the leader in designing convenience tools that make painting projects easier, faster and even fun. We offer a full product line of brushes, roller covers, mini rollers, paint trays, poles, frames, surface prep, edging and convenience tools.

Related

Is there a tool for cutting in painting?

The Accubrush edge-painting tool is one of the best we've tried. It makes cutting-in quick and easy. With just a little practice, you can paint perfectly straight lines along ceilings and moldings. You'll still have to finish some areas with a brush, though, since the tool can't paint right up to adjacent edges.Apr 21, 2021

Related

Where can I buy Shur-line paint Edgers?

  • This Shur-line Edger Pro is only available at Lowes Home Improvement. My only complaint is that for a $1 more, I’d probably reach for the SHUR-LINE 01000 Paint Premium Edger (affiliate link).

Related

How do you replace the pad on a Shur-line Edger?

  • (Versus sliding the pad off the bottom of the edger.) To replace the pad, simply snap it back in place and you are ready to roll. This Shur-line Edger Pro is only available at Lowes Home Improvement. My only complaint is that for a $1 more, I’d probably reach for the SHUR-LINE 01000 Paint Premium Edger (affiliate link).

Related

What is the best paint Edger for corners and edges?

  • Shur-line Pro Paint Edger Product Review […] for the corners and edges, is the paint edger. I found product on a blog by Brittany aka prettyhandygirl and a friend also ended up recommending it. It not only saves a lot of valuable time, but makes […]

Related

How do you use an edger wheel?

  • After the paint is loaded, flip the handle down and the wheels and edge guards are ready to edge. Simply run the edger wheels along moulding, window and door casing, and baseboards to paint a smooth, clean straight line. Another change I noticed was the cut out notches on the pad to further keep the paint away from the rollers and edge guards.

Related

Why choose Shur-line Edger Plus premium?Why choose Shur-line Edger Plus premium?

Painting the ceiling can be challenging, but with the Shur-Line Edger Plus Premium and your favorite sturdy paint extension pole, you can quickly and easily get perfectly cut lines around the edgesβ€”no more frustrating spots of paint on the walls.

Related

How do you replace the pad on a Shur-line Edger?How do you replace the pad on a Shur-line Edger?

(Versus sliding the pad off the bottom of the edger.) To replace the pad, simply snap it back in place and you are ready to roll. This Shur-line Edger Pro is only available at Lowes Home Improvement. My only complaint is that for a $1 more, I’d probably reach for the SHUR-LINE 01000 Paint Premium Edger (affiliate link).

Related

What is the best paint Edger for your car?What is the best paint Edger for your car?

The Shur-Line Paint Edger Pro (view at Amazon) solves the annoying problem of wheels tracked with paint by letting you flip the wheels out of the way while dipping the pad into your paint tray. That, along with its smooth performance and mess-free pad ejection feature make it our top choice.

Share this Post: